Thule Roof Bike Racks Review - 2019 Ford Expedition- Video

Carla: Hey guys, Carla here with etrailer.com. Today, we're going to be test fitting our Thule UpRide bike rack on this 2019 Ford Expedition Max. So this bike rack is going to offer a solution for those of you who have a really nice bike, you don't want any frame contact. As you can see, this bike rack is held on by the tires. And, as well as, if you're already using your hitch for something else, like pulling a camper, or you've got a cargo carrier or something else over there, you want to free up your hitch, this is going to offer a solution to get your bike up there.If you've got a really nice bike, like carbon fiber bike, you maybe don't want to put it on the back because you're afraid someone's going to hit you. You want to leave it up. more

Watch Video

8/13/2020 3:04:14 PM

Yakima FrontLoader Roof Bike Rack Review - 2014 Ford Expedition- Video

Today on our 2014 Ford Expedition. We're going to be test fitting the Yakima front loader, wheel mount bike rack part number Y02103. Their factory crossbars installed on the Expedition, we're going to begin our test fit by placing our bike rack directly onto our crossbars. At the front we'll be sure that the arms of our clamp are on the front and back of our crossbar. Then we can secure this by tightening the black T handle. Once we have that secured, we'll move to the rear, we'll need to lift the larger front wheel hook to access our black T handle located here. We'll loosen the black T handle, take the T-bolt out of the lower part of the clamp, bring the clamp around our bar, replace our T-bolt and tighten it down with a T handle. We'll now undo our rear wheel strap, grab our bike, place our bike into the front wheel cradle, rolling it forward gently to lift the rear part of the clamp. more

Watch Video

3/24/2014 4:33:14 PM

Yakima ForkLift Roof Mounted Bike Rack Review - 2014 Ford Expedition- Video

Today on our 2014 Ford Expedition, were going to be test fitting the Yakima ForkLift Roof Mounted Bike Rack, part number Y02098. With our factory crossbars on our Expedition, well begin the test fit by placing the rack directly on to our bars. Well then remove our front securer, slide back the black cover and remover the T-bolt from the lower part of our clamp. This will allow us to bring it around our crossbar. Well then reinsert the T-bolt through the appropriate slot, and tighten it down using the black T-handle. Well now slide our black plastic cover forward, and replace our front wheel securer. At the rear, well loosen the T-handle, remove the T-bolt from the slot, bring our clamp around our bars, reinsert the T-bolt into the appropriate slot, and tighten it down with the black T-handle. more

Watch Video

3/24/2014 4:32:35 PM

Swagman Upright Roof Mounted Bike Rack Review - 2014 Ford Expedition- Video

Today, on our 2014 Ford Expedition we're going to be test fitting the Swagman upright roof bike rack, part #S64720. With our factory roof rack on our Expedition, we'll begin by placing the bike rack directly onto our crossbars. At the front of the rack we're going to bring two of the silver U-bolts around the underside of our bar and up though the head of our carrier. We can then use two black wing nuts to secure each U-bolt. It's now time to move to the rear. This time, we're going to put the U-bolt down through the top of the rack, being sure it goes around our crossbar. We'll then bring the black metal plate up against the bottom of our crossbar with each side of the U-bolt going through it and then we will secure this using two wing nuts as well. Their bike rack secure to our vehicle, it's time to load our bike. more

Watch Video

3/19/2014 1:32:24 PM

Swagman Fork Down Roof Bike Rack Review - 2014 Ford Expedition- Video

Today on our 2014 Ford Expedition. We're going to be test fitting the Swagman fork down roof mounted bike rack. Part number FX6710. With the factory roof rack on our vehicle, we're going to begin our test fit by placing the bike rack directly onto our load bars. We'll bring the two U bolts around the underside of our load bars. We'll fit them through the appropriate holes in the head of carrier and tighten them down using wing knots. Once all four of our wing knots in the front are tighten and moved to the rear, This time we're going to place our U bolt down through the rack, we'll be sure that it goes on both sides of our load bar, we'll then place our black plate on our ubolt and secure this in place using two wing knots. more

Watch Video

3/18/2014 9:02:40 AM

RockyMounts TieRod Stretch Roof Bike Rack Review - 2014 Ford Expedition- Video

Today on our 2014 Ford Expedition, we're going to be test fitting the Rocky Mounts TieRod Stretch roof-mounted bike rack, part number RKY1011. With a factory roof rack on our vehicle, we're going to begin our test fit by placing the bike rack directly onto our load bars. Remove the black cover on the head of the rack. We'll bring the black rubber-coated metal straps around the underside of our load bar and fit these straps into their appropriate slot. We can then use an Allen key to tighten the Allen bolt, securing the straps around our load bar. With these tight, we'll move to the rear where we'll remove one of the bolts in the clamp. We'll then slide the clamp around our load bar, re-insert the bolt and tighten both bolts down with an Allen wrench. more

Watch Video

3/14/2014 11:50:01 AM

RockyMounts TieRod Roof Bike Rack Review - 2014 Ford Expedition- Video

Today on our 2014 Ford Expedition, were going to be test fitting the RockyMounts TieRod, a roof mounted bike rack, part number RKY1014. To begin our test fit, were going to place the bike rack directly onto our load bars. Well be sure at the front that our 2 black rubber coated metal straps go around the underside of our bar. Well then remove the black cover, place these black rubber coated metal straps in the appropriate slots on the head of our carrier and tighten them down using an Allen key. With this tight, well replace the black plastic cover. We can now move to the rear. Here, well remove one of the bolts in our clamp, bring our clamp around our load bar, reinsert our bolt and tighten both down using our Allen key. With our rack secured to our load bars, its now time to load our bike. more

Watch Video

3/14/2014 11:49:21 AM

Kuat TRIO Roof Bike Rack Review - 2014 Ford Expedition- Video

Today on our 2014 Ford Expedition, were going to be test fitting the Kuat Trio, an aluminum fork mount roof bike rack, part number RU01. With our factory roof rack installed on our Expedition, well begin our test fit by placing the rack directly on to our load bars. Well line the head of the carrier up on the front bar, we will bring two black rubber coated metal u-bolt around the underside of our bar through the head of the carrier. Well then take the four cylinder nuts and thread them down on to our u-bolts. Well use the provide Allen key to tighten these down.Well then move to the rear clamp where we will remove one of the wing nuts, bring one bolt down on each side of our rear crossbar, then replace the lower part of the clamp and the wing nut. We can then tighten this down to secure it to our rack. more

Watch Video

3/12/2014 2:51:07 PM

  1